Grįžti į Texas Instruments

Texas Instruments UCC20225/UCC20225-Q1 Isolated Gate Drivers

Texas Instruments UCC20225/UCC20225-Q1 Isolated Gate Drivers are single-input, dual-channel gate drivers with 4A source and 6A sink peak current. This driver comes in a space-saving 5mm x 5mm LGA-13 package. This device is designed to drive power MOSFETs, IGBTs, and SiC MOSFETs up to 5MHz with best-in-class propagation delay and pulse-width distortion, in applications requiring the highest power density. The input side is isolated from the two output drivers by a 2.5kVRMS reinforced isolation barrier, with a minimum of 100V/ns common-mode transient immunity (CMTI). Internal functional isolation between the two secondary-side drivers allows a working voltage of up to 700VDC.

The UCC20225/UCC20225-Q1 can be used for a half-bridge driver with programmable dead time (DT). When set high, a disable pin shuts down both outputs simultaneously and allows normal operation when left open or grounded. As a fail-safe measure, primary-side logic failures force both outputs low. The Texas Instruments UCC20225-Q1 devices are AEC-Q100 qualified for automotive applications.

Features

  • Single input, dual output
  • 5mm x 5mm space-saving LGA-13 package
  • Operating temperature range –40 to +125°C
  • Switching parameters
    • 19ns Typical propagation delay
    • 10ns Minimum pulse width
    • 5ns Maximum delay matching
  • 6ns maximum pulse-width distortion
  • Common-Mode Transient Immunity (CMTI) greater than 100V/ns
  • Surge immunity up to 4600V
  • 4A peak source, 6A peak sink output
  • TTL and CMOS compatible inputs
  • 3V to 18V input VCCI range to interface with both digital and analog controllers
  • Up to 25V VDD output drive supply
  • Programmable dead time
  • Rejects input pulses and noise transients shorter than 5ns
  • Fast disable for power sequencing
  • Safety-related and regulatory approvals
    • 3535VPK isolation per DIN V VDE V 0884-10 and DIN EN 61010-1
    • 2500VRMS isolation for 1 minute per UL 1577
    • CQC certification per GB4943.1-2011

Applications

  • Server, telecom, IT, and industrial infrastructures
  • Isolated converters in offline AC-to-DC power supplies
  • Motor drive and DC-to-AC solar inverters
  • LED lighting
  • HEV and BEV battery chargers

Datasheets

Functional Block Diagram

Block Diagram - Texas Instruments UCC20225/UCC20225-Q1 Isolated Gate Drivers

Development Tool

Texas Instruments UCC21225AEVM-365 Driver Evaluation Module (EVM)

Designed for the evaluation of the UCC21225ANPL, an isolated dual-channel gate driver.

Learn Moreabout Texas Instruments UCC21225AEVM-365 Driver Evaluation Module (EVM) View Productsrelated to Texas Instruments UCC21225AEVM-365 Driver Evaluation Module (EVM)
Paskelbta: 2017-08-16 | Atnaujinta: 2025-08-01