Grįžti į Swissbit

Swissbit M.2 SATA durabit™ Solid State Drive Modules

Swissbit M.2 SATA durabit™ Solid State Drive Modules are ideal for ultra-thin embedded computing applications that require mass storage in a very small footprint. These modules have a long service life with controlled BOM and a change notification process. The M.2 SATA modules are designed for industrial, NetCom, and automotive applications. These M.2 SATA SSDs meet the demands of high data transfer rates.

Features

  • Dynamic and static wear leveling
  • Subpage Mode Flash Translation Layer (FTL)
  • Active and passive data care management
  • Lifetime enhancements
    • Dynamic bad block remapping
    • Write amplification reduction
  • On-Board power fail protection
  • AHCI, TRIM, and NCQ support
  • ATA security feature set support
  • DEVSLP compatible
  • In-field firmware update
  • Enterprise-grade Self-monitoring, Analysis, and Reporting Technology (S.M.A.R.T.)
  • 30μ" gold-plated connector (IPC-6012B Class 2 compliant)
  • AES256 encryption (on request)
  • Swissbit Life Time Monitoring (SBLTM) tool and SDK for SBLTM (on request)

Applications

  • Industrial
  • NetCom
  • Automotive

Specifications

  • 8GB, 16GB, 30GB, 60GB, 120GB, 240GB, 480GB capacities
  • 3.3V ±5% operating voltage
  • Temperature ranges
    • Operating
      • 0 to 70°C commercial
      • -40°C to 85°C industrial
    • -40°C to 85°C storage
  • Data retention
    • 10 years at life begin
    • 1-year at life end
  • Power (maximum capacity)
    • 1.5W Read (active)
    • Write
      • 3.2W active
      • 380mW idle 
      • 115mW slumber
  • 1500g/50g shock/vibration
  • Hardware BCH code ECC with up to 66-bit correction per 1kb
  • >200,000 hours Mean Time Between Failure (MTBF)
  • Data reliability of<1 non-recoverable error per 1016 bits read
  • Performance
    • Sequential read up to 520 MBytes/s, random read 4K up to 75000 IOPS
    • Sequential read up to 450 MBytes/s, random read 4K up to 75000 IOPS
  • Supports ATA/ATAPI-8 and ACS-2 command sets
  • JEDEC M0-300 full-size mSATA SDD form factor (50.8mm x 29.85mm x 3.5mm)
  • SATA Gen3-6 bits/s compliance (Gen2 3bits/s and Gen1 1.5bits/s backward compatible)
Paskelbta: 2016-05-25 | Atnaujinta: 2024-02-15