ROHM Semiconductor Automotive IPD 2ch Low Side Switches
ROHM Semiconductor Automotive IPD 2-channel Low Side Switches are equipped with an output diagnostic function for Thermal Shutdown (TSD). These devices integrate a monolithic Power Management IC (PMIC) with a control block (CMOS) and a power MOSFET on a single chip. The automotive low-side switches exhibit built-in protection functions such as active clamp function, overcurrent, and dual thermal shutdown. These automotive IPD switches offer an 80mΩ typical on-resistance (R DS(ON) ) with 5V IN , 1.5AI OUT , and 25°C T j conditions. The automotive low-side switches are available in the SOP-J8 package with 4.9mm x 6mm x 1.65mm dimensions. The AEC-Q100 qualified low-side switches are optimized for 12V automotive applications and is suitable for driving resistive, inductive, and capacitive loads.
Features
- Built-in dual Thermal Shutdown (TSD)
- AEC-Q100 qualified (Grade1)
- Built-in Over Current Protection Function (OCP)
- Built-in active clamp function
- Direct control enabled from CMOS logic IC
- 80mΩ on-resistance R DS(ON) (typical) (V IN =5V, I OUT =1.5A, Tj=25°C)
- Monolithic Power Management IC (PMIC) with the control block (CMOS) and power MOSFET mounted on a single chip
Applications
- 12V automotive requirements
- Driving resistive, inductive, and capacitive loads
Block Diagram
Dimensions
Datasheets
Paskelbta: 2024-10-23
| Atnaujinta: 2025-07-10