Grįžti į Apacer Technology Inc.

Apacer Technology Inc. SV250-M242 Solid State Drives (SSDs)

Apacer Technology Inc. SV250-M242 Solid State Drives (SSDs) are high-speed storage drives designed with a SATA 6Gb/s interface. These SSDs utilize 3D NAND for a higher capacity of up to 960GB and provide more power efficiency than 2D NAND. The SV250-M242 SSDs comply with the SATA Revision 3.2 interface specifications and deliver exceptional read/write speed. These SSDs are built with a powerful SATA controller that supports on-the-module ECC and an efficient wear-leveling scheme. The SV250-M242 SSDs are implemented with Low-Density Parity Check (LDPC) ECC engine to extend SSD endurance and improve reliability.

The SV250-M242 SSDs are equipped with built-in thermal sensors to monitor the temperature of the SSD via Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) commands to prevent overheating. These SSDs consist of a single-chip controller and flash media. This controller integrates a flash management unit to support multi-channel and multi-bank flash arrays. The SV250-M242 SSDs operate at 3.3V ±5% supply voltage and a -40°C to 85°C wide temperature range. These SSDs are RoHS compliant and are available in 42mm x 22mm x 3.80mm dimensions. Typical applications include imaging, computing, industrial, and enterprise networks.

Features

  • Compliance with SATA revision 3.2:
    • SATA 6Gb/s interface
    • Backward compatible with SATA 1.5Gb/s and 3Gb/s interfaces
    • ATA-8 command set
  • Performance:
    • 600MB/s burst read/write
    • Up to 560MB/s sequential read
    • Up to 470MB/s sequential write
    • Up to 50,000IOPS random read (4K)
    • Up to 68,000IOPS random write (4K)
  • Flash management:
    • Low-Density Parity Check (LDPC) code
    • Global wear leveling
    • Flash bad-block management
    • Page mapping flash translation layer
    • Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.)
    • DataDefender™
    • Device sleep
    • ATA secure erase
    • TRIM
    • Hyper cache technology
    • Over-provisioning
    • DataRAID™
    • SMART read refresh™
  • Endurance (Drive Writes Per Day (DWPD)):
    • 120GB: 2.03DWPD
    • 240GB: 2.28DWPD
    • 480GB: 2.21DWPD
    • 960GB: 2.34DWPD
  • 120GB, 240GB, 480GB, and 960GB capacity
  • 75-pin SATA-based M.2 module pinout connector type
  • 3D TLC (BiCS5) NAND flash type
  • >3,000,000 hours MTBF
  • Security:
    • AES 256-bit hardware encryption
    • Trusted Computing Group (TCG) opal 2.0 (optional)
  • Reliability:
    • Thermal sensor
    • End-to-end data protection
  • RoHS compliant

Specifications

  • Power consumption:
    • 380mA maximum in active mode
    • 60mA in idle mode
  • 0°C to 70°C standard operating temperature range
  • -40°C to 85°C wide operating temperature range
  • -55°C to 100°C storage temperature range
  • 3.3V ±5% supply voltage
  • Form factor:
    • M.2 2242-D5-B-M
    • 42mm x 22mm x 3.80mm dimensions
    • 3.86g ±5% net weight

Applications

  • Imaging
  • Computing
  • Industrial
  • Enterprise networks

Functional Block Diagram

Block Diagram - Apacer Technology Inc. SV250-M242 Solid State Drives (SSDs)

Mechanical Diagram

Mechanical Drawing - Apacer Technology Inc. SV250-M242 Solid State Drives (SSDs)
Paskelbta: 2023-05-30 | Atnaujinta: 2023-06-12