Grįžti į Analog Devices Inc.

Analog Devices / Maxim Integrated MAX9240A 25-Bit GMSL Deserializer

Analog Devices Inc. MAX9240A 25-Bit Compact Deserializer is designed to interface with a GMSL serializer over 50Ω coax or 100Ω shielded twisted-pair (STP) cable. This ADI device pairs with MAX9271 or MAX9273 serializers. The parallel output is programmable for single or double output. Double output strobes out half of a parallel word on each pixel clock cycle. Double output can be used with GMSL serializers that have the double-input feature. 

MAX9240A features an embedded control channel that operates at 9.6kbps to 1Mbps. Using the control channel, a microcontroller can program the serializer/deserializer and peripheral device registers at any time, independent of video timing. Two programmable GPIO ports and a continuously sampled GPI input are available. For use with longer cables, the device has a programmable equalizer. Programmable spread spectrum is available on the parallel output. The serial input meets ISO 10605 and IEC 61000-4-2 ESD standards. The core supply range is 1.7V to 1.9V and the I/O supply range is 1.7V to 3.6V. The device operates over a -40°C to +105°C temperature range.

Features

  • Ideal for camera applications
    • Works with low-cost 50Ω coax cable and FAKRA connectors or 100Ω STP
    • Error detection/correction
    • 9.6kbps to 1Mbps Control channel in I2C-to-I2C mode with clock-stretch capability
    • 90mA (max) Supply current
    • Double-rate clock for megapixel cameras
    • Cable equalization allows 15m cable at full speed
    • 48-Pin (7mm x 7mm) TQFN-EP package with 0.5mm lead pitch
  • High-speed data deserialization for megapixel cameras
    • 6.25MHz to 100MHz Clock up to 1.5Gbps serial-bit rate with single or double output
  • Multiple control-channel modes for system flexibility
    • 9.6kbps to 1Mbps Control channel in UART-to-UART or UART-to-I2C modes
  • Reduces EMI and shielding requirements
    • Input programmable for 100mV to 500mV
    • Single-ended or 50mV to 400mV differential
    • Programmable spread spectrum on the parallel output reduces EMI
    • Tracks spread spectrum on serial input
  • Peripheral features for camera power-up and verification
    • Built-in PRBS checker for BER testing of the serial link
    • Two GPIO ports
    • Dedicated "Up/Down" GPI for camera frame sync trigger and other uses
    • Remote/local wake-up from sleep mode
  • Meets rigorous automotive and industrial requirements
    • -40°C to +105°C Operating temperature
    • ±10kV Contact and ±15kV air IEC 61000-4-2 ESD protection
    • ±10kV Contact and ±30kV air ISO 10605 ESD protection

Functional Diagram

Block Diagram - Analog Devices / Maxim Integrated MAX9240A 25-Bit GMSL Deserializer
Paskelbta: 2014-06-05 | Atnaujinta: 2023-04-11