Marki Microwave Signal Kondicionavimas

Rezultatai: 568
Pasirinkite Vaizdas Dalies Nr.
 Gam.
Aprašymas Duomenų Lapas Prieinamumas Kainodara (EUR) Filtruokite lentelėje pateiktus rezultatus pagal vieneto kainą, remdamiesi kiekiu.
Qty. RoHS ECAD modelis Gaminio tipas
Gaminys
Dažnis
Dažnių diapazonas
Nurodytoji įtampa
Varža
Terminacijos Stilius
Pakuotė / Korpusas
Minimali darbinė temperatūra
Didžiausia darbinė temperatūra
Marki Microwave Signal Kondicionavimas The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
Duomenų Lapas
1Pagal užsakymą
Min.: 1
Daugkart.: 1

Signal Conditioning Mixers 10 MHz to 20 GHz 10 MHz to 20 GHz Connector - 55 C + 100 C
Marki Microwave Signal Kondicionavimas The ADM-8344 is a wideband distributed low noise amplifier capable of providing 18 dB gain and +27 dBm OIP3 from DC to 18 GHz and a low 1.4 dB typical noise figure from 4 to 7 GHz.
Duomenų Lapas
1Tikėtina 2027-01-01
Min.: 1
Daugkart.: 1

Signal Conditioning
Marki Microwave Signal Kondicionavimas A high-linearity amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM1-8096PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Duomenų Lapas
1Tikėtina 2026-12-11
Min.: 1
Daugkart.: 1

Signal Conditioning
Marki Microwave Signal Kondicionavimas A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
Duomenų Lapas
3Tikėtina 2026-10-30
Min.: 1
Daugkart.: 1

Signal Conditioning Baluns 200 kHz to 3 GHz 200 kHz to 3 GHz 50 Ohms Connector
Marki Microwave Signal Kondicionavimas A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
Duomenų Lapas
16Pagal užsakymą
Min.: 1
Daugkart.: 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz 50 Ohms
Marki Microwave Signal Kondicionavimas The BAL-0026 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 26.5 GHz bandwidth.
Duomenų Lapas
5Pagal užsakymą
Min.: 1
Daugkart.: 1

Signal Conditioning Baluns 300 kHz to 26.5 GHz 300 kHz to 26.5 GHz 50 Ohms Connector
Marki Microwave Signal Kondicionavimas The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
Duomenų Lapas
1Tikėtina 2026-11-06
Min.: 1
Daugkart.: 1

Signal Conditioning Baluns 300 kHz to 36 GHz 300 kHz to 36 GHz
Marki Microwave Signal Kondicionavimas A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
Duomenų Lapas
8Pagal užsakymą
Min.: 1
Daugkart.: 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz 50 Ohms Connector
Marki Microwave Signal Kondicionavimas A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
Duomenų Lapas
10Tikėtina 2026-11-13
Min.: 1
Daugkart.: 1

Signal Conditioning Baluns 500 kHz to 6 GHz 500 kHz to 6 GHz SMD/SMT - 55 + 100 C
Marki Microwave Signal Kondicionavimas A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
Duomenų Lapas
46Pagal užsakymą
Min.: 1
Daugkart.: 1

Signal Conditioning Baluns 500 kHz to 9 GHz 500 kHz to 9 GHz SMD/SMT
Marki Microwave Signal Kondicionavimas The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Duomenų Lapas
8Tikėtina 2026-12-11
Min.: 1
Daugkart.: 1

Signal Conditioning Bias Tees 50 Ohms Connector
Marki Microwave Signal Kondicionavimas The BT-0026SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 26 GHz bandwidth.
Duomenų Lapas
10Tikėtina 2026-12-25
Min.: 1
Daugkart.: 1

Signal Conditioning
Marki Microwave Signal Kondicionavimas The BT-0035SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 35 GHz bandwidth.
Duomenų Lapas
20Tikėtina 2027-01-01
Min.: 1
Daugkart.: 1

Signal Conditioning 10 MHz to 20 GHz 10 MHz to 20 GHz 30 V SMD/SMT - 55 C + 100 C
Marki Microwave Signal Kondicionavimas A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 12 GHz bandwidth.
Duomenų Lapas
69Tikėtina 2027-01-08
Min.: 1
Daugkart.: 1

Signal Conditioning 500 kHz to 12 GHz 500 kHz to 12 GHz 30 V 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Signal Kondicionavimas A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 26 GHz bandwidth.
Duomenų Lapas
10Tikėtina 2026-11-06
Min.: 1
Daugkart.: 1

Signal Conditioning 500 kHz to 26 GHz 500 kHz to 26 GHz 30 V SMD/SMT + 100 C
Marki Microwave Signal Kondicionavimas This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
Duomenų Lapas
1Tikėtina 2026-10-23
Min.: 1
Daugkart.: 1

Signal Conditioning
Marki Microwave Signal Kondicionavimas The CBR16-0003 offers the highest directivity of any standalone 3 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
Duomenų Lapas
3Pagal užsakymą
Min.: 1
Daugkart.: 1

Signal Conditioning 200 kHz to 3 GHz 200 kHz to 3 GHz Connector
Marki Microwave Signal Kondicionavimas A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band and has a typical 1 dB compression point of 11 dBm.
Duomenų Lapas
229Tikėtina 2026-09-04
Min.: 1
Daugkart.: 1

Signal Conditioning 0 Hz to 10 GHz 0 Hz to 10 GHz 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Signal Kondicionavimas The HLM-20PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-20GHz bandwidth. It offers low insertion loss and excellent return loss from DC through K band and has a typical 1 dB compression point of 15 dBm.
Duomenų Lapas
36Prieinamumas
125Tikėtina 2026-12-31
Min.: 1
Daugkart.: 1

Signal Conditioning 0 Hz to 20 GHz 0 Hz to 20 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Signal Kondicionavimas The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss over a wide operating bandwidth.
Duomenų Lapas
20Tikėtina 2026-09-29
Min.: 1
Daugkart.: 1

Signal Conditioning
Marki Microwave Signal Kondicionavimas The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion.
Duomenų Lapas
Ne Sandėlyje Esančių Prekių Pristatymo Laikas 18 Savaičių
Min.: 1
Daugkart.: 1

Signal Conditioning
Marki Microwave Signal Kondicionavimas The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
Duomenų Lapas
1Tikėtina 2026-10-23
Min.: 1
Daugkart.: 1

Signal Conditioning
Marki Microwave Signal Kondicionavimas 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
Duomenų Lapas
76Pagal užsakymą
Min.: 1
Daugkart.: 1
Signal Conditioning Power Dividers SMD/SMT
Marki Microwave Signal Kondicionavimas A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.
Duomenų Lapas
1Tikėtina 2026-08-26
Min.: 1
Daugkart.: 1

Signal Conditioning
Marki Microwave Signal Kondicionavimas The BT-0026SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 26 GHz bandwidth.
Duomenų Lapas
7Tikėtina 2026-08-13
Min.: 1
Daugkart.: 1

Signal Conditioning