|
|
Raspberry Pi Accessories This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
- PRT-13054
- SparkFun
-
1:
0,91 €
-
39In Stock
|
Mouser Part No
474-PRT-13054
|
SparkFun
|
Raspberry Pi Accessories This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
|
|
39In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Headers & Wire Housings This is a simple 3-pin male PTH straight header. Each pin can even be broken apart if you only need one or two pins instead of all three.The pins on this header have been spaced at the 0.1" standard.
- PRT-27908
- SparkFun
-
1:
0,268 €
-
80In Stock
-
New Product
|
Mouser Part No
474-PRT-27908
New Product
|
SparkFun
|
Headers & Wire Housings This is a simple 3-pin male PTH straight header. Each pin can even be broken apart if you only need one or two pins instead of all three.The pins on this header have been spaced at the 0.1" standard.
|
|
80In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags & Transponders This is a basic RFID tag that operates in accordance with the MIFARE Classic 1K specifications. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a co
- SEN-10128
- SparkFun
-
1:
3,45 €
-
108In Stock
|
Mouser Part No
474-SEN-10128
|
SparkFun
|
NFC/RFID Tags & Transponders This is a basic RFID tag that operates in accordance with the MIFARE Classic 1K specifications. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a co
|
|
108In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Force Sensors & Load Cells This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
- SEN-11207
- SparkFun
-
1:
27,05 €
-
4In Stock
|
Mouser Part No
474-SEN-11207
|
SparkFun
|
Force Sensors & Load Cells This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Screwdrivers, Nut Drivers & Socket Drivers What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
- TOL-12891
- SparkFun
-
1:
4,73 €
-
5In Stock
|
Mouser Part No
474-TOL-12891
|
SparkFun
|
Screwdrivers, Nut Drivers & Socket Drivers What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Keyboards Multimedia Wireless Keyboard
- WIG-14271
- SparkFun
-
1:
27,95 €
-
3In Stock
-
5On Order
|
Mouser Part No
474-WIG-14271
|
SparkFun
|
Keyboards Multimedia Wireless Keyboard
|
|
3In Stock
5On Order
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Interface Development Tools The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without requiring soldering. The ESLOV t
- BOB-23589
- SparkFun
-
1:
1,96 €
-
10In Stock
|
Mouser Part No
474-BOB-23589
|
SparkFun
|
Interface Development Tools The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without requiring soldering. The ESLOV t
|
|
10In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Cable Assemblies This is a nice short U.FL to U.FL cable used to connect submodules and other RF devices to carrier boards. 50mm is length is long enough to reach but short enough to be tidy and minimize signal degradation. The 50-ohm impedance of this cable makes
- CAB-29325
- SparkFun
-
1:
2,64 €
-
5In Stock
-
New Product
|
Mouser Part No
474-CAB-29325
New Product
|
SparkFun
|
RF Cable Assemblies This is a nice short U.FL to U.FL cable used to connect submodules and other RF devices to carrier boards. 50mm is length is long enough to reach but short enough to be tidy and minimize signal degradation. The 50-ohm impedance of this cable makes
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Photodiodes The BPW34 is a tiny general purpose PiN photodiode. This photodiode has a ton of uses one of which is to use it is a mini solar cell to power your project. The cell is sensitive to a wide range of light wavelengths (430-1100nm) so it should produc
- PRT-09541
- SparkFun
-
1:
1,51 €
-
24In Stock
|
Mouser Part No
474-PRT-09541
|
SparkFun
|
Photodiodes The BPW34 is a tiny general purpose PiN photodiode. This photodiode has a ton of uses one of which is to use it is a mini solar cell to power your project. The cell is sensitive to a wide range of light wavelengths (430-1100nm) so it should produc
|
|
24In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
USB Connectors The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looking to powe
- PRT-18015
- SparkFun
-
1:
1,90 €
-
13In Stock
|
Mouser Part No
474-PRT-18015
|
SparkFun
|
USB Connectors The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looking to powe
|
|
13In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Educational Robotic Kits This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. We recommend our small servo motors listed below.Note: Servos are not included. The sub-micro servo size
- ROB-10335
- SparkFun
-
1:
5,81 €
-
5In Stock
|
Mouser Part No
474-ROB-10335
|
SparkFun
|
Educational Robotic Kits This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. We recommend our small servo motors listed below.Note: Servos are not included. The sub-micro servo size
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Video Modules This is the Logitech C270 Webcam. With a sleek compact look and a black finish this is not just for looks. This economical choice provides a 720p/30FPS HD resolution in a 16:9 widescreen format. The Logitech C270 webcam is compatible with most major
- SEN-16299
- SparkFun
-
1:
45,84 €
-
9In Stock
|
Mouser Part No
474-SEN-16299
|
SparkFun
|
Video Modules This is the Logitech C270 Webcam. With a sleek compact look and a black finish this is not just for looks. This economical choice provides a 720p/30FPS HD resolution in a 16:9 widescreen format. The Logitech C270 webcam is compatible with most major
|
|
9In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories LiPo Battery Manager Battery Manager
- PRT-13777
- SparkFun
-
1:
20,32 €
-
188In Stock
|
Mouser Part No
474-PRT-13777
|
SparkFun
|
SparkFun Accessories LiPo Battery Manager Battery Manager
|
|
188In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Have you ever needed to power a project while in your car? Now you can without having to drag a computer along with this cost effective 5V 2.4A USB car charger. These car chargers have a standard USB 'A' connector for the output so you can power you
- TOL-16886
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-TOL-16886
|
SparkFun
|
SparkFun Accessories Have you ever needed to power a project while in your car? Now you can without having to drag a computer along with this cost effective 5V 2.4A USB car charger. These car chargers have a standard USB 'A' connector for the output so you can power you
Due to government regulations, Mouser is unable to sell this product in your country.
|
|
|
|
|
|
|
|
|
Programmable Logic IC Development Tools SparkFun QuickLogic Thing Plus - EOS S3
- DEV-17273
- SparkFun
-
1:
43,10 €
-
19In Stock
|
Mouser Part No
474-DEV-17273
|
SparkFun
|
Programmable Logic IC Development Tools SparkFun QuickLogic Thing Plus - EOS S3
|
|
19In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Headers & Wire Housings This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
- PRT-15363
- SparkFun
-
1:
1,68 €
-
73In Stock
|
Mouser Part No
474-PRT-15363
|
SparkFun
|
Headers & Wire Housings This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
|
|
73In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Vibration Motors A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. The housing protects all moving parts. With a 2-3.6V operating
- ROB-08449
- SparkFun
-
1:
2,57 €
-
76In Stock
|
Mouser Part No
474-ROB-08449
|
SparkFun
|
Vibration Motors A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. The housing protects all moving parts. With a 2-3.6V operating
|
|
76In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
- WRL-15131
- SparkFun
-
1:
32,37 €
-
5In Stock Restricted Availability
|
Mouser Part No
474-WRL-15131
|
SparkFun
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
Product available only to OEM/EMS and design business customers. Product is not shipped to consumers in the EU or the UK. This product will require additional documentation to export from the United States.
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Multiprotocol Modules The Edimax 2-in-1 Wi-Fi 4 N150 & Bluetooth 4.2 Nano USB Adapter is a nano-sized USB Wi-Fi adapter with Bluetooth 4.2 that supports Wi-Fi up to 150Mbps while allowing users to connect to all the latest Bluetooth devices such as mobile phones ta
- WRL-22824
- SparkFun
-
1:
14,52 €
-
3In Stock
|
Mouser Part No
474-WRL-22824
|
SparkFun
|
Multiprotocol Modules The Edimax 2-in-1 Wi-Fi 4 N150 & Bluetooth 4.2 Nano USB Adapter is a nano-sized USB Wi-Fi adapter with Bluetooth 4.2 that supports Wi-Fi up to 150Mbps while allowing users to connect to all the latest Bluetooth devices such as mobile phones ta
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Antenna Accessories Many magnetic mount GPS antennas rely on being mounted on a car or other large metallic object to provide a good ground plane. But what if you want to use an antenna not on a car? The GPS Antenna Ground Plate is the solution! This plate significantly
- GPS-17519
- SparkFun
-
1:
6,96 €
-
28In Stock
|
Mouser Part No
474-GPS-17519
|
SparkFun
|
Antenna Accessories Many magnetic mount GPS antennas rely on being mounted on a car or other large metallic object to provide a good ground plane. But what if you want to use an antenna not on a car? The GPS Antenna Ground Plate is the solution! This plate significantly
|
|
28In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Current Sensors – Industrial Measuring high-voltage AC current doesn't have to mean splicing into live dangerous wires. This non-invasive current sensor also known as a split-core current transformer or current clamp lets you measure exactly how much current is passing throug
- SEN-11005
- SparkFun
-
1:
13,38 €
-
3In Stock
|
Mouser Part No
474-SEN-11005
|
SparkFun
|
Current Sensors – Industrial Measuring high-voltage AC current doesn't have to mean splicing into live dangerous wires. This non-invasive current sensor also known as a split-core current transformer or current clamp lets you measure exactly how much current is passing throug
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm).
- SEN-00246
- SparkFun
-
1:
0,95 €
-
1 282In Stock
|
Mouser Part No
474-SEN-00246
|
SparkFun
|
SparkFun Accessories This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm).
|
|
1 282In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of th
- SEN-13332
- SparkFun
-
1:
98,58 €
-
12In Stock
|
Mouser Part No
474-SEN-13332
|
SparkFun
|
SparkFun Accessories This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of th
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Multilayer Ceramic Capacitors MLCC - Leaded This is a basic 1000pF 100V 5% tolerance PTH ceramic capacitor.
- COM-30151
- SparkFun
-
1:
0,358 €
-
96In Stock
-
New Product
|
Mouser Part No
474-COM-30151
New Product
|
SparkFun
|
Multilayer Ceramic Capacitors MLCC - Leaded This is a basic 1000pF 100V 5% tolerance PTH ceramic capacitor.
|
|
96In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
DC Fans The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled
- PRT-17368
- SparkFun
-
1:
6,15 €
-
5In Stock
|
Mouser Part No
474-PRT-17368
|
SparkFun
|
DC Fans The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|