SparkFun Electronics Komunikacijos Vystymo Priemonės

Komunikacijos vystymo priemonių tipai
Pakeisti kategorijos rodinį
Rezultatai: 90
Pasirinkite Vaizdas Dalies Nr.
 Gam.
Aprašymas Duomenų Lapas Prieinamumas Kainodara (EUR) Filtruokite lentelėje pateiktus rezultatus pagal vieneto kainą, remdamiesi kiekiu.
Qty. RoHS
SparkFun WiFi Kūrimo Įrankiai - 802.11 The SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488. The module features the Realtek RTL8721DM integrated single-chip low-power dual-band (2.4GHz and 5GHz) wireless LAN communication controller. It Ne Sandėlyje Esantys
Min.: 1
Daugkart.: 1
SparkFun „Bluetooth“ kūrimo priemonės – 802.15.1 The Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano but featuring a lot more powerful processor the nRF52840 from Nordic Semiconductors a 32-bit ARM Cortex -M4 CPU running at 64 MHz. This will allow you to make larger Ne Sandėlyje Esantys
Min.: 1
Daugkart.: 1
SparkFun GNSS / GPS Development Tools The SparkFun NEO-M9N GNSS Function Board is a high quality geospatial board with equally impressive configuration options. The NEO-M9N module that is populated on this board is a 92-channel u-blox M9 engine GNSS receiver meaning it can receive sign Ne Sandėlyje Esantys
Min.: 1
Daugkart.: 1
SparkFun GNSS / GPS Development Tools The SparkFun NEO-D9S GNSS Correction Data Receiver is a satellite data receiver for L-Band correction broadcast. It can be configured for use with a variety of correction services including u-blox's PointPerfect satellite GNSS augmentation service w Ne Sandėlyje Esantys
Min.: 1
Daugkart.: 1
SparkFun GNSS / GPS Development Tools With GNSS you are able to know where you are where you're going and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GNSS Real Time Kinematics (RTK) has mastered dialing in the accuracy of their G Ne Sandėlyje Esantys
Min.: 1
Daugkart.: 1
SparkFun GNSS / GPS Development Tools The GNSS landscape is evolving and the SparkFun Triband GNSS RTK Breakout is leading the charge. This board provides the simplest way to access the L1 L2 and L5 bands simultaneously. At its heart is Septentrio's flagship mosaic-X5 module an ul Ne Sandėlyje Esančių Prekių Pristatymo Laikas 14 Savaičių
Min.: 1
Daugkart.: 1
SparkFun WiFi Kūrimo Įrankiai - 802.11 WizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds WiFi connectivity using WizFi360. It is pin compatible with Raspberry Pi Pico board and can be used for IoT Solution development. WizFi-EVB-Pico pinout is directly connected to the GPIO of RP Ne Sandėlyje Esantys
Min.: 1
Daugkart.: 1

SparkFun „Bluetooth“ kūrimo priemonės – 802.15.1 The SparkFun NINA-B306 Thing Plus offers a unique combination development platform in the Thing Plus form factor featuring the NINA-B306 from u-blox™ the ISM330DHCX 6DoF IMU from STMicroelectronics™ and the BME280 atmospheric sensor from Ne Sandėlyje Esantys
Min.: 1
Daugkart.: 1
SparkFun „Bluetooth“ kūrimo priemonės – 802.15.1 The SparkFun Pro nRF52840 Mini is a breakout and development board for Nordic Semiconductor s nRF52840 a powerful combination of ARM Cortex-M4 CPU and 2.4GHz Bluetooth radio. With the nRF52840 at the heart of your project you ll be presented
Duomenų Lapas
Ne
SparkFun GNSS / GPS Development Tools SparkFun GPS Break- Out XA1110 (Qwiic)
Duomenų Lapas
Ne
SparkFun GNSS / GPS Development Tools With GPS you are able to know where you are where you're going and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dialing in the accuracy on their GPS
Duomenų Lapas
Ne
SparkFun Nfc/RFID Kūrimo Įrankiai RFID Starter Kit Starter Kit
Duomenų Lapas
Ne
SparkFun Tinklo Kūrimo Įrankiai The Particle Xenon is a low-cost mesh-enabled development board. With the Nordic nRF52840 SoC you have all the power of an ARM Cortex M4 with OpenThread mesh networking NFC plenty of GPIOs LiPo charging and more. The board is designed to act as a
Ne
SparkFun Nfc/RFID Kūrimo Įrankiai The SparkFun RFID Qwiic Kit is a simple yet all-in-one I2C based RFID starting point for the ID-3LA ID-12LA and ID-20LA readers. Simply plug a reader into the headers and use a Qwiic cable to connect to any Qwiic enabled development board then sc
Duomenų Lapas
Ne
SparkFun „Zigbee“ kūrimo priemonės – 802.15.4 The XBee3 Thing Plus is an ultra capable and easy way for getting into wireless device development. The combination of XBee and Qwiic in a space conscious design represents a much needed update to our XBee offering. With 20 I/O pins and Lithium Polym
Duomenų Lapas
Ne