Visi rezultatai (377)

Pasirinkite Vaizdas Dalies Nr. Gam. Aprašymas Duomenų Lapas Prieinamumas Kainodara (EUR) Filtruokite lentelėje pateiktus rezultatus pagal vieneto kainą, remdamiesi kiekiu. Qty. RoHS
Marki Microwave Signal Kondicionavimas The T3-18G is a high performance mixer featuring LO/RF from 10 MHz to 18 GHz and IF from 1 MHz to 10 GHz. 2Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas The BAL-0067 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 67 GHz bandwidth. 1Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth. 3Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz. 2Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications. 1Prieinamumas
2Tikėtina 2026-05-14
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas MMIQ-0520L is a low LO drive, passive GaAs MMIC IQ mixer that operates down to an unrivaled +3 dBm LO drive level. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz. 2Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas The PBR-0006 is a 300 kHz to 6 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 40 dB typical isolation across the operational bandwidth. 2Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz. 3Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas MM1-0212L is a low power GaAs MMIC double balanced mixer that operates at LO powers as a low as +1 dBm. MM1-0212L is a low frequency, low power S band mixer that works well as both an up and down converter to through X band. 2Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas MM1-1044H is a GaAs MMIC double balanced mixer that is designed for and operates at the K and Ka band 5G frequencies. MM1-1044H is a high linearity Ka band mixer that works well as both an up and down converter. 1Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas A resistive 2-way power divider that features broadband operation from DC to 20 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance. 1Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance. 1Prieinamumas
7Tikėtina 2026-07-07
Min.: 1
Daugkart.: 1

Marki Microwave RF Adapteriai - Trišakiai The BTN2-0026 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance. 1Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 9dBm. 2Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas The ADA-2052 can be used as a frequency extender to enhance the frequency range of a <26 GHz synthesizer up to 52 GHz. Useful for lab testing, test and measurement, and prototype systems. 3Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry. 5Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave RF Stiprintuvas The ADM2-0035PA is an LO driver amplifier module with 2 internally connected wideband gain stages and equalization. It is designed to provide sufficient gain and output power for Marki S-diode mixers below 35 GHz with an input power of 0-5 dBm. 3Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm. 3Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas The AQA-2156 is an amplified frequency multiplier that quadruples the 5.25 14 GHz input frequency, producing an amplified 21 - 56 GHz quadrupled output frequency. 3Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth. 2Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas The BT-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance. 5Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave RF Adapteriai - Trišakiai The BTN-0050 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance. 5Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave RF Adapteriai - Trišakiai The BTN-0065 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance. 3Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas A high power type N-connectorized bidirectional coupler capable of operation to 18 GHz. This coupler features a unique air-line construction that simultaneously enables extremely low loss and high directivity. 5Prieinamumas
Min.: 1
Daugkart.: 1

Marki Microwave Signal Kondicionavimas The CBR17-0026 offers the broadest bandwidth of any standalone bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss. 3Prieinamumas
Min.: 1
Daugkart.: 1